Every section we pull. Standard sections ship from stock; anything else is made to your drawing on a custom die. Wall thickness from 3 mm, cut to length, drilled and marked per batch.
Filter All lines FRP Cable Trays FRP Gratings & Walkways Structural Profiles Pipes, Tubes & Ducts Handrails, Railings & Ladders Fittings & Hardware Fencing & Zatka Rods
Line 01
FRP Cable Trays Ladder, perforated and raceway trays pulled in 3, 4, 5 and 6 mm wall. Our ladder tray uses a square-section rung with a combined mechanical and adhesive rung lock, so the joint carries load without hardware creep. Full fitting range — bends, tees, cross bands, reducers, covers and supports — from the same batch.
LT FRP Ladder Cable Tray Square rung, mechanical + adhesive rung lock. 50–900 mm widths.
Enquire → PT FRP Perforated Cable Tray Slotted base for tie-down. 3 / 4 / 5 / 6 mm wall.
Enquire → RW Raceway / Trough Tray Solid-bottom closed raceway with clip-on cover.
Enquire → XB Horizontal Cross Band Cross, tee and reducer bands for tray junctions.
Enquire → BD Tray Bends & Elbows 90° and 45°, horizontal or vertical, radius to order.
Enquire → CV Covers & Clamps Peaked or flat covers, hold-down clamps, splice plates.
Enquire → GRP GRP Cable Tray Vinyl-ester grade for chlorine, acid and offshore duty.
Enquire → SUP Tray Support System Cantilever arms, channels and FRP hardware.
Enquire → Line 02
FRP Gratings & Walkways Pultruded and moulded gratings with a grit anti-skid top, cut and edge-banded to your opening. Used for platforms, walkways, trench covers and solar-plant access routes where a steel floor would rust out.
25 25 mm Pultruded Grating Light-duty walkways and trench covers.
Enquire → 38 38 mm Pultruded Grating Standard platform and access flooring.
Enquire → 50 50 mm Pultruded Grating Heavy-duty spans and vehicle-free decks.
Enquire → MG Moulded Grating Bi-directional strength, 30 / 38 / 50 mm depth.
Enquire → SW Solar Walkway Grating Narrow-run panels for module rows and inverter decks.
Enquire → GP Grating Profile / Bar Load bars and cross rods sold as profile stock.
Enquire → ST Stair Treads Nosing-fitted treads with grit surface.
Enquire → TC Trench & Pit Covers Framed panels with lifting provision.
Enquire → Line 03
Structural Profiles The building kit — angles, channels, flats, rods, beams and tubes. Standard sizes run continuously; anything else is pulled on a custom die to your drawing.
Line 04
Pipes, Tubes & Ducts Closed sections for structural and containment duty — round pipe, square and rectangular tube, and fabricated ducting for fume and effluent lines.
RND FRP Round Pipe Structural pipe, 25–150 mm OD.
Enquire → SQR FRP Square Tube 25 × 25 to 100 × 100 mm.
Enquire → REC FRP Rectangular Tube Frames, posts and cross members.
Enquire → DCT FRP Ducts Fabricated fume and effluent ducting.
Enquire → Line 05
Handrails, Railings & Ladders Bolt-together non-conductive access systems — handrail runs, ladders with safety cages and self-closing gates, assembled on site without hot work.
HR FRP Handrail System Two-rail and three-rail with kick plate.
Enquire → RL FRP Railings Platform and walkway edge protection.
Enquire → LD FRP Ladder Vertical ladder with optional safety cage.
Enquire → GT Safety Gate Self-closing gate for ladder and stair openings.
Enquire → Line 06
Fittings & Hardware The small parts that keep an installation fully non-metallic — FRP fasteners, plates, caps and clamps supplied with the run.
BLT FRP Bolts & Nuts M8–M16, isophthalic or VE grade.
Enquire → SPL Splice Plates Straight and expansion splices for tray runs.
Enquire → CLP Clamps & Hold-downs Cable and tray retention hardware.
Enquire → CAP End Caps & Trims Profile closures and edge trims.
Enquire → Line 07
Fencing & Zatka Rods Fully insulating fence components for agricultural and perimeter fencing — no leakage from the wires, safe with high-voltage pulse energisers.
16 FRP Zatka Rod 16 mm Non-conductive rod for pulse-fence lines.
Enquire → PST FRP Fence Post 3 ft to 8 ft, drilled to pitch.
Enquire → FR 3 Feet FRP Fencing Railing Pre-assembled fencing panel.
Enquire → INS Insulator Brackets Wire carriers and tensioner fittings.
Enquire → Indicative properties Typical values for pultruded E-glass / polyester sections. Certified test values are issued with each batch.
Need a section that isn't listed? Send the drawing — we quote the die, the trial and the production run together.
LT
PT
RW
XB
BD
CV
GRP
SUP
25
38
50
MG
SW
GP
ST
TC
50×25
50×50
75×30
75×40
100×50
150×50
FLT
ROD
